John Bratton
view:
flat
| tree
Subject:
[BOB] Tektro Brake Lever Blues
Date:
4/7/2011 9:44:16 AM
List:
Internet-BOB
--20cf305643bf35810c04a056d2e8
Content-Type: text/plain; charset=ISO-8859-1
Hi folks- Do you ever feel somewhat less than mechanically competent? I sure
get that way sometimes. I was trying to adjust the high-profile cantilevers
on my mtn-bike-turned commuter Miyata, and finally got tired of the
fiddlyness of the smooth stud pads. I figured, OK, I'll start fresh. Bought
some Tektro CR720 brakes to go with the Tektro R200A ergo drop bar brake
levers already on there. I figured I'd do a quick install on the front just
to see how things went, using the existing brake cable. On that one, I
figure I need to lower the straddle cable a bit, which of course puts the
straddle right where my dynolight wants to be. But, for right now, at least
the front works. I'll optimize later and figure if I want to bend the light
mount or what.
On the rear, I figured I'd go ahead and do it right and start with a new
cable. Install brakes on post. OK, the springs are a bit rattly, but then I
see that they tension when there will be a cable pre-loading them. All OK. I
get out my new cable, on of the "cut whichever end off you don't need" type.
I cut the mountain chock off, the feed the end into the brake levers. First
the cable end mount, and then... OK, it heads on further in there. Somehow.
Somewhere. I can see, if I put a flashlight just right, that there's an
orifice of some sort on the far end. But it really doesn't seem to want to
take the cable.
Anybody have this problem before? I realize now that this is the first time
I've installed a new cable in an existing set-up with these Tektro levers. I
even thought, OK, well, if it's so dang hard to get the cable in there, why
don't I pull the lever off of the bar, so I can eyeball it, hold it in my
hand etc. But, ugh, of course the bars are taped. And twined at the ends.
And that tactic may not get me too far anyway.
Got any tips? I know one would be to get a real cable. It sort of tweaks me
that when you buy a standard cable these days, it is an "either/or" cable,
suitable for mountain or road use. Now I know that helps with inventory
control at shops, but it sure as heck is annoying not to have a tinned end
to work with. Heck, I've probably frayed and cut clean this cable I'm using
enough times that it isn't even long enough to use on the back now. Urg.
The Tektro manual says, "Insert the brake cable into the cable pull and
through backside of the lever. Insert cable into the housing and push the
using firmly into back of the brake lever until it is seated firmly in the
housing stop." I'm no wiser. Is there something I'm missing?
John "befuddled by old technology" Bratton
Denver, CO
--
You received this message because you are subscribed to the Google Groups
"internet-bob" group.
To post to this group, send email to internet-bob@googlegroups.com.
To unsubscribe from this group, send email to
internet-bob+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/internet-bob?hl=en
n
--20cf305643bf35810c04a056d2e8
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
<div>Hi folks- Do you ever feel somewhat less than mechanically competent? =
I sure get that way sometimes. I was trying to adjust the high-profile cant=
ilevers on my mtn-bike-turned commuter Miyata, and finally got tired of the=
fiddlyness of the smooth stud pads. I figured, OK, I'll start fresh. B=
ought some Tektro CR720 brakes to go with the Tektro R200A ergo drop bar br=
ake levers already on there. I figured I'd do a quick install on the fr=
ont just to see how things went, using the existing brake cable. On that on=
e, I figure I need to lower the straddle cable a bit, which of course puts =
the straddle right where my dynolight wants to be. But, for right now, at l=
east the front works. I'll optimize later and figure if I want to bend =
the light mount or what.=A0</div>
<div><br></div><div>On the rear, I figured I'd go ahead and do it right=
and start with a new cable. Install brakes on post. OK, the springs are a =
bit rattly, but then I see that they tension when there will be a cable pre=
-loading them. All OK. I get out my new cable, on of the "cut whicheve=
r end off you don't need" type. I cut the mountain chock off, the =
feed the end into the brake levers. First the cable end mount, and then... =
OK, it heads on further in there. Somehow. Somewhere. I can see, if I put a=
flashlight just right, that there's an orifice of some sort on the far=
end. But it really doesn't seem to want to take the cable.=A0<br>
</div><div><br></div><div>Anybody have this problem before? I realize now t=
hat this is the first time I've installed a new cable in an existing se=
t-up with these Tektro levers. I even thought, OK, well, if it's so dan=
g hard to get the cable in there, why don't I pull the lever off of the=
bar, so I can eyeball it, hold it in my hand etc. But, ugh, of course the =
bars are taped. And twined at the ends. And that tactic may not get me too =
far anyway.</div>
<div><br></div><div>Got any tips? I know one would be to get a real cable. =
It sort of tweaks me that when you buy a standard cable these days, it is a=
n "either/or" cable, suitable for mountain or road use. Now I kno=
w that helps with inventory control at shops, but it sure as heck is annoyi=
ng not to have a tinned end to work with. Heck, I've probably frayed an=
d cut clean this cable I'm using enough times that it isn't even lo=
ng enough to use on the back now. Urg.=A0</div>
<div><br></div><div>The Tektro manual says, "Insert the brake cable in=
to the cable pull and through backside of the lever. Insert cable into the =
housing and push the using firmly into back of the brake lever until it is =
seated firmly in the housing stop." I'm no wiser. Is there somethi=
ng I'm missing?</div>
<div><br></div><div>John "befuddled by old technology" Bratton</d=
iv><div>Denver, CO</div>
<p></p>
-- <br />
You received this message because you are subscribed to the Google Groups "=
internet-bob" group.<br />
To post to this group, send email to internet-bob@googlegroups.com.<br />
To unsubscribe from this group, send email to internet-bob+unsubscribe@goog=
legroups.com.<br />
For more options, visit this group at
http://groups.google.com/group/intern=
et-bob?hl=3Den.<br />
--20cf305643bf35810c04a056d2e8--